Per Page

Showing 1–15 of 43 results

Air Entrainment Meter for Mortar

STANDARDS : EN 413-2, 459-2, 1015-7 The PRS-CEMAEMFM  Air Entrainment Meter for Mortar is used for determining the air content of cement paste, cement mortar and lime mortar. The air entrainment meter is manufactured from cast ...

Automatic Pull Off Tester 5 kN

STANDARDS : EN 1452,EN 12399,EN 12618-2,EN 13279-2,BS 1881-207,EN 13678-1 This dynamometer provides you with information on both the adhesive force and the tensile strength of two layers of materials: lime, facing plasters, mortars, building plasters, cements, ...

Bulk Density Apparatus

STANDARDS : EN 459-2 The bulk density of lime is of interest for storage and packaging and for determining volume and capacity of mixing equipment necessary for processing the material.

Calcimeter

Calcimeter is used for determining the CaCO3 in limestone and lime marl. Comprising a glass container and connected gas-holder. A reaction in the glass container between the sample calcium carbonate and a solution of diluted hydrochloric ...

Cement Length Comparators

STANDARDS : EN 1367–4, 12617–4, 12808-4; ASTM C151, C157, C227, C311, C341, C342, C441,C452, C490, C531, C596, C806, C878; BS 1881:5, 6073 Length Comparators are used to determine the length changes on different type of cement prisms. ...

Cement Samplers

STANDARDS : EN 196-7; ASTM C183; AASHTO T127 The Packaged Cement Tube Sampler is made of brass and used for collecting cement samples from packages. The  Bulk Cement Sampler is used to collect cement samples from ...

Cement Autoclave

STANDARDS : ASTM C151, C490; UNE 7207 The PRS-CEMAUTCLV  High Pressure Cement Autoclave is designed to perform expansion tests on cement specimens.10 specimens can simultaneously be tested in the high pressure steam vessel of 154 mm ...

Cement Flow Table

STANDARDS : ASTM C230; EN 459-2, 1015-3 There are two models of the Cement Flow Table, the PRS-CEMFLW/A conforming to ASTM and the PRS-CEMFLW/E conforming to the EN standard. Both are used for determining the consistency ...

Cement Moulds

STANDARDS : EN 196-1; ASTM C109; BS 4550  All moulds have been manufactured from steel and all internal surfaces are machined. All dimensions and specifications comply with the related standards.